Expedition 2WD V8-281 4.6L VIN W EFI (1997)
3. Bleed the front disc brake caliper. See: Bleeding
4. Clean the wheel hub mounting surface.
WARNING: Always remove any corrosion, dirt or foreign material present on the mounting surfaces of the wheel or the surface of the
wheel hub, brake drum or front disc brake rotor that contacts the wheel. Installing wheels without proper metal to metal contact at the
wheel mounting surfaces can cause the lug nuts to loosen and could allow the wheel to come off while the vehicle is in motion, causing loss
of control.
Install Tire And Wheel Assembly
5. Install the tire and wheel assembly.
6. Inspect the brake operation.
NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.
