Expedition 2WD V8-281 4.6L VIN W EFI (1997)
Wheel Speed Sensor: Service and Repair
Toothed Ring
Rear
The differential case must be disassembled and assembled to replace the rear sensor indicator. Refer to Transmission and Drivetrain for details.
Removal and Installation
REMOVAL
1. Remove the front disc brake rotor.
2. Use 2-3 Jaw Puller to remove the front brake anti-lock sensor indicator.
NOTE: Discard the front brake anti-lock sensor indicator.
INSTALLATION
1. Install the new front brake anti-lock sensor indicator.
a. Position the front brake anti-lock sensor indicator.
b. Use an appropriate size cylinder and press to install the front brake anti-lock sensor indicator.
NOTE: The front brake anti-lock sensor indicator must be pressed on straight.
2. Install the front disc brake rotor.