Expedition 2WD V8-281 4.6L VIN W EFI (1997)
Coolant Reservoir: Service and Repair
REMOVAL
1. Partially drain the cooling system.
2. Remove the radiator coolant recovery reservoir hose from the radiator.
a. Release the hose clamp and slide away from the hose end.
b. Slide the radiator coolant recovery reservoir hose off the radiator fitting.
3. Remove the lower radiator hose from the radiator coolant recovery reservoir.
4. Remove the radiator coolant recovery reservoir.
a. Remove the two radiator coolant recovery reservoir bolts.
b. Remove the radiator coolant recovery reservoir.
INSTALLATION
To install, reverse the removal procedure.