Expedition 2WD V8-281 4.6L VIN W EFI (1997)
Connecting Rod: Specifications
Connecting Rod, Engine
DIMENSIONS
Alignment (Bore-to-Bore Max. Diff.):
Twist [1] ................................................................................................................................................................................... + 1.27 mm (0.05 inch)
Bend ................................................................................................................................................................................... + 0.038 mm (0.0014 inch)
Bore Diameter:
Crankshaft Bearing: ..................................................................................................................................... 56.866-56.886 mm (2.2383-2.2395 inch)
Piston Pin..................................................................................................................................................... 22.012-22.024 mm (0.8665-0.8677 inch)
Length:
Center-to-Center ........................................................................................................................................................................ 150.7 mm (5.93 inch)
Side Clearance (Assembled to Crank):
Standard ............................................................................................................................................................ 0.015-0.45 mm (0.0006-0.0177 inch)
Service Limit ............................................................................................................................................................................... 0.50 mm (0.02 inch)
[1] Pin bore and crank bearing bore must be parallel and in same vertical plane within the specified total difference when measured at the ends of a
203 mm bar, 101.5 mm on each side of rod centerline.-Twist mm (inch)