Expedition 2WD V8-281 4.6L VIN W EFI (1997)
1. Apply silicone in two places where the engine front cover meets the cylinder head.
^
Use Silicone Gasket and Sealant F6AZ-19562-AA or equivalent meeting Ford specification WSE-M4G323-A6.
NOTE: Cam cover must be installed within four minutes after silicone is applied.
2. Position the (A) cam cover on the (B) cylinder head and loosely install the cam cover bolts.
3. Tighten the cam cover bolts in the sequence shown.
4. Position wiring harness onto cam cover studs.
