Expedition 2WD V8-281 4.6L VIN W EFI (1997)
Engine Mount: Service and Repair
RH
REMOVAL
1. Remove the engine cooling fan and the fan shroud.
2. Raise and support the vehicle.
WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING,
JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR
SUSPENSION SWITCH LOCATED IN THE 1tH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED
INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE
OPERATIONS.
3. Remove the starter motor.
4. Remove the RH engine mount to frame mount bolt.
5. Loosen the LH engine mount to frame mount bolt.
6. Lift the engine with a suitable jack.
