Expedition 2WD V8-281 4.6L VIN W EFI (1997)
4. Use (A) O-Ring Tool to remove the (B) shaft seal felt from the nose of the A/C compressor.
5. Clean the compressor nose area.
6. Use (A) Snap Ring Remover to remove the (B) shaft seal snap ring.
7. Engage (A) Shaft Seal Remover into the (B) internal diameter of the shaft seal.
8. Turn the tool handle clockwise to expand the tool tip inside of the shaft seal.
9. Pull the seal from the compressor.
INSTALLATION
CAUTION: Do not allow dirt or other foreign materials to enter the compressor.
NOTE: Obtain a new A/C Compressor Shaft Seal Kit. Carefully remove the contents of the kit and inspect the plastic shaft seal protector for
burrs or other damage. DO NOT USE IF IT IS DAMAGED.
1. Clean the compressor nose area.
