Expedition 2WD V8-281 4.6L VIN W EFI (1997)
2. Position the (A) shaft seal on the (B) Shaft Seal Protector.
3. Lubricate Shaft Seal Protector and shaft seal.
^
Use Motorcraft YN-12b Refrigerant Oil F2AZ-19577-AC or equivalent meeting Ford specification WSH-M1C231-B.
4. Position the shaft seal and Shaft Seal Protector over compressor shaft.
5. Use Shaft Seal Replacer to install the seal.
6. Remove Shaft Seal Replacer and Shaft Seal Protector.
7. Install a new shaft seal snap ring.
8. Conduct a leak test.
9. Install a new shaft seal felt in the compressor nose.
10. Install the A/C clutch on the A/C compressor.
11. Check and adjust the air gap as necessary.
12. Leak test the A/C system.
13. Evacuate and charge the system. See: Service and Repair/Evacuation
