Expedition 2WD V8-281 4.6L VIN W EFI (1997)
Alignment: Service and Repair
Caster and Camber
1. Remove the alignment plate.
(1) Remove the upper suspension arm adjusting nuts.
(2) Remove the alignment plate.
2. Install the (A) cams and the (B) upper arm adjusting nuts.
3. To increase caster, move the (A) front of the front suspension upper arm outboard and move the (B) rear of the front suspension upper arm
inboard. To increase camber, move the (C) front suspension upper arm outboard equally.
4. To decrease caster, move the (A) front of the front suspension upper arm inboard and move the (B) rear of the front suspension upper arm
outboard. To decrease camber, move the (C) front suspension upper arm inboard equally.
