Expedition 2WD V8-281 4.6L VIN W EFI (1997)
9. Install the tube brackets.
1. Position the bracket.
2. Install the nut.
^
Snap the tube into the bracket.
NOTE: The bracket must be positioned equally between the white location marks on the tube.
10. Install the muffler heat shield.
1. Position the shield.
2. Install the nuts.
11. Lower the vehicle.
NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.
12. Install the grommet tube seal and retainer.
NOTE: Insure that the tubes are entering through the center of the floor opening and that the retainer locating marks are positioned correctly.
13. Connect the heater outlet hose to the auxiliary heater core.
