Expedition 2WD V8-281 4.6L VIN W EFI (1997)
3. Connect the front auxiliary outlet tube to the condenser line.
1. Connect the tube.
2. Install the nut.
4. Install the tube brackets.
1. Position the bracket.
2. Install the nut.
^
Snap the tube into the bracket.
NOTE: The bracket must be positioned equally between the white location marks on the tube.
5. Install the front fender splash shield.
6. Lower the vehicle.
NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.
7. Evacuate and charge the A/C system. See: Heating and Air Conditioning/Service and Repair/Evacuation