Expedition 2WD V8-281 4.6L VIN W EFI (1997)
Air Filter Element: Service and Repair
REMOVAL
1. Open the (A) air cleaner clamp and set the (B) outlet engine air cleaner aside.
2. Remove the (A) air cleaner element from the (B) open end of the inlet engine air cleaner.
INSTALLATION
1. Install the air cleaner element.
NOTE: The inlet engine air cleaner has an alignment tab which fits into a slot on the outlet engine air cleaner. This ensures a good seal and keeps
unmetered air from entering the engine.
CAUTION: The air cleaner outlet tube should be securely sealed to prevent unmetered air from entering the engine.
2. Position the engine air cleaner aligning the alignment tab.
