Expedition 2WD V8-281 4.6L VIN W EFI (1997)
Throttle Cable/Linkage: Service and Repair
REMOVAL
1. Disconnect the (A) accelerator cable from the (B) accelerator pedal and shaft.
2. Remove the accelerator control splash shield.
1
Remove the accelerator control splash shield bolts.
2
Remove the accelerator control splash shield.
3. Unclip the accelerator cable from the accelerator cable clip.
4. Remove the (A) accelerator cable to bulkhead bolts and pull the (B) accelerator cable through the bulkhead.
