ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Transmission and Drivetrain > < PCM - Reprogramming Tips
Page 2
background image

the customer.

PCM REPROGRAMMING WITH SBTS/NGS

1.

Select "NGS," then follow procedure "Touring PLM Recalibration."

2.

Be sure to use cable with oversized DCL connector. The oversized connector incorporates an 18-volt transformer supplying the required voltage to
reprogram the PCM.

OTHER APPLICABLE ARTICLES: NONE
SUPERSEDES: 96-25-11
WARRANTY STATUS: INFORMATION ONLY 
OASIS CODES: 206000, 690000, 698298

Transmission and Drivetrain > < PCM - Reprogramming Tips