Expedition 2WD V8-281 4.6L VIN W EFI (1997)
To install, reverse the removal procedure.
Seat Belt With Anchor Plate Thread Damage
1. Remove the broken or stripped bolt and discard.
2. Drill out the internal threads in the safety belt anchor plate with a 27/64 inch drill.
3. Rethread the anchor plate with a 1/2-13 tap (seat belt).
Parts Replacement Chart (Typical)
4. Install the attachment parts. Original parts are to be replaced with the repair parts indicated in the manufacturer's safety belt replacement
guidelines. Unless otherwise specified, use original parts.
Seat Belt Without Anchor Plate Thread Damage
1. Expose the suspect anchor point.
NOTE: This procedure is for replacement of the weld nut. If the reinforcement is also missing, the body side must be removed and replaced.
