Expedition 2WD V8-281 4.6L VIN W EFI (1997)
(2) Install a new cotter pin.
3. Install the front stabilizer bar link nut.
4. Remove the Coil Spring Compressor.
5. Install the front shock absorber and the two shock absorber lower nuts.
6. Install the upper shock absorber nut.
7. Install the brake hose bracket screw.
8. Install the disc brake rotor splash shield.
9. Clean the wheel hub mounting surface.
WARNING: WHEN A WHEEL IS INSTALLED, ALWAYS REMOVE ANY CORROSION, DIRT OR FOREIGN MATERIAL
PRESENT ON THE MOUNTING SURFACES OF THE WHEEL OR THE SURFACE OF THE WHEEL HUB, BRAKE DRUM OR
BRAKE ROTOR THAT CONTACTS THE WHEEL. INSTALLING WHEELS WITHOUT PROPER METAL TO METAL CONTACT
