Expedition 2WD V8-281 4.6L VIN W EFI (1997)
Wiper Pivot: Service and Repair
Windshield Wiper Pivot Arm
REMOVAL
NOTE
^
The windshield wiper mounting arms and pivot shafts are repaired as an assembly.
^
The windshield wiper pivot arms must be in highest position to remove the mounting arms and pivot shaft.
1. Turn the ignition switch to the ON position.
2. Turn the windshield wiper on.
3. Stop the windshield wiper pivot arms at the highest position by turning the ignition switch to the OFF position.
4. Remove the windshield wiper pivot arm.
1. Remove the pivot arm nut cover.
2. Remove the nut.
3. Remove the windshield wiper pivot arm.
INSTALLATION
1. To install, reverse the removal procedure.
^
Adjust the windshield wiper pivot arms. See: Adjustments