Expedition 2WD V8-4.6L SOHC VIN W (2000)
Front Fender: Service and Repair
FENDER - FRONT, EXPEDITION
Removal and Installation
1. Remove the radiator grille opening panel reinforcement (8A284).
2. If equipped, remove the front wheel opening moulding.
1
Remove the pin-type retainer.
2
Remove the screws.
3
Remove the wheel opening moulding.
3. Remove the front fender splash shield (16103).
1
Remove the screws.
2
Remove the pin-type retainers.
3
Remove the front fender splash shield.
4. Remove the cowl grille.
5. Remove the inner fender stuffer.
6. Remove the stone guard.
1
Remove the pin-type retainers.
2
Remove the stone guard.