Expedition 2WD V8-4.6L SOHC VIN W (2000)
7. Raise and support the vehicle. For additional information, refer to Maintenance/Service and Repair.
8. Lower the muffler heat shield.
1
Remove the two front bolts.
2
Lower the heat shield.
9. Remove the four line bracket retaining nuts.
10. Remove the four line brackets by inserting a screwdriver in the stud hole and twisting.
CAUTION: Pull the bracket off the stud before attempting to pry it off the lines to prevent component damage.
11. Disconnect the outlet line peanut fitting.
1
Remove the nut.
2
Disconnect the line.
