Expedition 2WD V8-4.6L SOHC VIN W (2000)
10. CAUTION: Unless otherwise instructed, at no time when the timing chains are removed and the cylinder heads are installed is the crankshaft or
camshaft to be rotated. Severe piston and valve damage will occur.
CAUTION: Rotate the crankshaft counterclockwise only. Do not rotate past position shown or severe piston and/or valve damage can occur.
Position the crankshaft with the Crankshaft Holding Tool.
11. Remove the Crankshaft Holding Tool.
Fig. 26 Crankshaft Sprocket Position
12. NOTE: Crankshaft sprockets are identical. They may only be installed one way. Refer to the following illustration for correct crankshaft sprocket
installation.
If removed, install the LH and RH crankshaft sprockets.
