Expedition 2WD V8-4.6L SOHC VIN W (2000)
12. Attach the seat back trim cover side J-clips.
1
Connect the seat back trim cover side J-clips.
2
Fold the hook and loop strip under the trim cover and attach it.
13. Install the seat into the vehicle.
14. Connect the battery ground cable.
15. Prove out the air bag system.
WARNING: THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE FROM
VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE COULD RESULT IN INJURY AND POSSIBLE VIOLATION OF
VEHICLE SAFETY STANDARDS.