Expedition 2WD V8-4.6L SOHC VIN W (2000)
7. CAUTION: Do not damage the wheel bearing oil seal.
Remove the axle shaft.
Installation
1. Lubricate the lip of the wheel bearing oil seal.
-
Use Premium Long-Life Grease XC-1-C or equivalent meeting Ford specification ESA-M1C75-B.
2. CAUTION: Do not damage the wheel bearing oil seal.
Install the axle shaft.
3. CAUTION: Do not damage the rubber O-ring in the axle shaft groove.
Install the U-washer.