Expedition 2WD V8-5.4L SOHC VIN L (1997)
a. Remove the two caliper bolts.
b. Lift the front disc brake caliper off the front disc brake caliper anchor plate.
7. Measure the front disc brake hub and rotor thickness.
^
Replace the front disc brake hub and rotor if not within specifications.
8. Inspect the disc brake caliper for leaks.
^
If leaks are found, disassembly is required.
INSTALLATION
1. Install the front disc brake caliper and bolts; torque to 28-36 Nm (21-26 ft. lbs.).
2. Install the front brake hose; torque banjo bolt to 30-40 Nm (23-29 ft. lbs.).
^
Use new copper washers to connect the front brake hose.
