Expedition 2WD V8-5.4L SOHC VIN L (1997)
3. Install the oil tube pick up bolts.
4. Install the oil pick up tube bracket bolt.
5. Apply silicone at the front cover to block mating surface.
^
Use Ford Silicone Gasket and Sealant F6AZ-19562-AA or equivalent meeting Ford specification WSE-M4G323-AB.
NOTE: If the if the oil pan is not secured within four minutes, the sealant must be removed and the sealing area cleaned with Metal Surface
Cleaner F4AZ-19A536-RA or equivalent meeting Ford specification WSE-M5B392-A. Allow to dry until there is no sign of wetness, or four
minutes, whichever is longer. Failure to follow this procedure may result in future oil leakage.
6. Apply silicone at the rear oil seal retainer to block sealing surface.
^
Use Ford Silicone and Gasket Sealer F6AZ-1956-AA or equivalent meeting Ford specification WSE-M4G323-AB.
NOTE: If the if the oil pan is not secured within four minutes, the sealant must be removed and the sealing area cleaned with Metal Surface
