Expedition 2WD V8-5.4L SOHC VIN L (1997)
Cleaner F4AZ-19A536-RA or equivalent meeting Ford specification WSE-M5B392-A. Allow to dry until there is no sign of wetness, or four
minutes, whichever is longer, Failure to follow this procedure may result in future oil leakage.
7. Position the oil pan gasket.
8. Install the oil pan bolts and torque in the three stages, in the sequence shown.
^
Stage 1: 2 Nm.
^
Stage 2: 20-30 Nm.
^
Stage 3: Rotate 90 degrees.
9. Position a suitable jack under the rear axle.
10. Place suitable jacks under the engine and lift the engine to remove the blocks.