Expedition 2WD V8-5.4L SOHC VIN L (1997)
Intake Manifold: Service and Repair
Removal
1. Disconnect the battery ground cable.
2. Relieve the fuel pressure.
WARNING: DO NOT SMOKE OR CARRY LIGHTED TOBACCO OR OPEN FLAME OF ANY TYPE WHEN WORKING ON OR
NEAR ANY FUEL RELATED COMPONENTS. HIGHLY FLAMMABLE MIXTURES ARE ALWAYS PRESENT AND MAY BE
IGNITED, RESULTING IN POSSIBLE PERSONAL INJURY.
3. Drain the cooling system.
4. Slide the (A) hose clamp and disconnect the (B) upper radiator hose.
5. Remove the accelerator control splash shield.
a. Remove the bolts.
b. Remove the accelerator control splash shield.