Expedition 2WD V8-5.4L SOHC VIN L (1997)
Air Door Actuator / Motor: Service and Repair
Vacuum Control Motors
Air Inlet Door
REMOVAL
1. Remove the plenum assembly
2. Remove the air inlet door vacuum control motor.
1. Disconnect the vacuum line.
2. Remove the air inlet door vacuum control motor screws.
3. Remove the air inlet door vacuum control motor.
^
Rotate vacuum control motor to disconnect the vacuum control motor rod from air inlet door lever.
INSTALLATION
1. To install, reverse the removal procedure.
Panel/Defrost Door
REMOVAL
1. Carefully pry to release the four clips and remove the steering column opening cover.
NOTE: On vehicles equipped with automatic transmissions, move the shift control selector lever to the 1 position to make removal easier.
