Expedition 2WD V8-5.4L SOHC VIN L (1997)
Install the new safety belt(s) using the appropriate instructions. Perform Functional Test Procedure in Testing and Inspection.
Front Safety Belt
REMOVAL
NOTE: This procedure is for the LH side; RH side is similar.
1. Remove the bolt.
1
Lift the bolt cover.
2
Use Safety Belt Bolt Bit to remove the bolt.
2. Use T55 "Torx" Bit to remove the anchor bolt.
3. Remove the B-pillar trim panel.
4. Remove the front safety belt retractor.
1
Use Safety Belt Bolt Bit to remove the bolt.
2
Remove the retractor.
INSTALLATION