Expedition 2WD V8-5.4L SOHC VIN L (1997)
Seat Belt Buckle: Service and Repair
Removal and Installation
Driver Seat
REMOVAL
Remove the driver seat safety belt buckle.
NOTE: To ease removal, position the driver seat in its most rearward position and the passenger seat in its most forward position.
1
Disconnect the safety belt warning indicator switch electrical connector.
2
Use Safety Belt Bolt Bit to remove the bolt.
3
Remove the buckle.
INSTALLATION
To install, reverse the removal procedure.
-
Check the restraint system for proper operation.
Center and RH Passenger
REMOVAL
Remove the front passenger safety belt.
1
Use T55 "Torx" Bit to remove the bolt.
2
Feed the belt through the seat cushion pocket and remove the belt.
INSTALLATION
