Expedition 2WD V8-5.4L SOHC VIN L (1997)
Starter Solenoid: Service and Repair
WARNING: WHEN PERFORMING MAINTENANCE ON THE STARTING SYSTEM BE AWARE THAT HEAVY GAUGE LEADS ARE
CONNECTED DIRECTLY TO THE BATTERY. MAKE SURE PROTECTIVE CAPS ARE IN PLACE WHEN MAINTENANCE IS
COMPLETE.
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the relay cover.
3. Disconnect the starter motor solenoid relay switch wires and cables.
1. Remove the insulator.
2. Disconnect the ignition switch signal wire.
3. Remove the starter motor solenoid relay switch terminal nuts.
4. Remove the engine control sensor wire and the generator wire.
5. Remove the battery cables.
4. Remove the starter motor solenoid relay switch.
1. Remove the starter motor solenoid relay switch bolts.
2. Remove the starter motor solenoid relay switch.
INSTALLATION