ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Mechanical Specifications|Page 8615 > < Mechanical Specifications|Page 8613
Page 1
background image

Steering Gear: Adjustments

1. Turn the steering wheel from right lock to left lock at least once.

NOTE:  The engine should not be running.

2. Remove the driver side air bag.
3. Raise and support the vehicle.

WARNING:  THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING,
JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR
SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED
INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE
OPERATIONS.

4. Remove the steering sector shaft arm drag link castellated nut.

(1) Remove the cotter pin.
(2) Remove the castellated nut.

5. Use Pitman Arm Puller to separate the steering sector shaft arm drag link.
6. Lower and support the front of the vehicle.

NOTE:  The front wheels should not touch the ground.

Mechanical Specifications|Page 8615 > < Mechanical Specifications|Page 8613