Expedition 2WD V8-5.4L SOHC VIN L (1997)
2. Inspect the following for contamination or damage. Clean or replace, as necessary.
-
No. 6 center support thrust washer (A) seal ring grooves (B) inner hub diameter (C) outer hub diameter (D) feedbolt threads (E) ball bearing
(F)
ASSEMBLY
1. Follow the removal procedure in reverse order.
-
Lightly lubricate the thrust washer with petroleum jelly to hold it in place during assembly.
-
Install new seals.
Direct Clutch Assembly and Intermediate Brake Drum
NOTE: MERCON Automatic Transmission Fluid is being replaced by MERCON V as a service fluid.