Expedition 2WD V8-5.4L SOHC VIN L (1997)
Torque Converter: Testing and Inspection
Torque Converter Leakage Checks
1. Clean the outside surface of the torque converter.
2. Install the Torque Converter Leak Check Tool and Gasket into the converter hub.
3. Install the torque converter with the installed leak check tool into the press.
4. Secure the press. Apply enough force from the press to seal the tool into the torque converter.
WARNING: ALWAYS FOLLOW PROPER SAFETY PROCEDURES WHILE USING THE PRESS.
5. Apply a maximum of 80 psi air pressure to the valve on the leak check tool.
NOTE: Use clean, dry shop air.
