Expedition 2WD V8-5.4L SOHC VIN L (1997)
6. Install the anti-lock speed sensor ring by aligning the tab on the anti-lock speed sensor ring with the slot on the differential case.
7. Start two of the ring gear bolts to make sure the alignment is correct.
8. Press the new (A) anti-lock speed sensor ring and the (B) ring gear on the differential case.
9. Install the ring gear bolts.
-
Apply Stud and Bearing Mount EOAZ-19554-BA or equivalent meeting Ford specification WSK-M2G349-A1 to ring gear bolts.
