Expedition 2WD V8-5.4L SOHC VIN L (1997)
(1) Remove the bolts.
(2) Remove the differential bearing caps.
(3) Remove the differential case.
10. Remove the ring gear bolts.
11. Use a drift that will bottom out in the ring gear bolt holes to separate the differential ring gear from the differential case.
12. Remove the speed sensor ring.
NOTE: The speed sensor ring cannot be reused once removed.
13. Install a Nm (inch.lbs) torque wrench on the pinion nut and record the torque required to maintain rotation of the pinion through several
revolutions.
