Expedition 2WD V8-5.4L SOHC VIN L (1997)
30. Install the differential case without the ring gear.
(1) Position the differential case, including the differential bearing shims.
(2) Position the differential bearing caps.
(3) Install the differential bearings cap bolts.
31. Measure and record the differential case runout.
(1) Rotate the differential case.
(2) Measure and record the differential case runout.
NOTE:
-
If the runout is now within specification, use the new differential case bearings for assembly. If the runout is still excessive, the differential
case is damaged and should be replaced.
-
Specification shown is the maximum differential case runout allowable.
32. Remove the differential case from the axle housing.
(1) Remove the bolts.
(2) Remove the differential bearing caps.
(3) Remove the differential case.
Installation
