Expedition 2WD V8-5.4L SOHC VIN L (1997)
Universal Joint: Service and Repair
Disassembly and Assembly
Double Cardan
DISASSEMBLY
1. Remove driveshaft.
2. Place the driveshaft on a suitable workbench.
CAUTION: Do not clamp the driveshaft in a vise or similar holding fixture.
3. Mark the positions of the driveshaft components.
NOTE: If components are not marked and installed correctly, driveline imbalance may occur.
4. Clamp U-Joint Tool in a vise.
5. Remove the eight snap rings.