Expedition 2WD V8-5.4L SOHC VIN L (1997)
6. Remove the driveshaft slip yoke.
(1) Position the driveshaft slip yoke in U-Joint Tool.
(2) Press out bearing cups.
(3) Remove the driveshaft slip yoke.
7. Press out the second set of bearing cups.
(1) Position the driveshaft slip yoke in U-Joint Tool.
(2) Press out the bearing cup.
(3) Rotate the driveshaft slip yoke.
(4) Press out the remaining bearing cup.
8. Remove the centering cup spring.
9. Remove the driveshaft center yoke.
(1) Position the driveshaft center yoke in U-Joint Tool.
(2) Press out the bearing cup.
