Expedition 2WD V8-5.4L SOHC VIN L (1997)
10. If the vibration is still evident, rotate the clamps away from each other until balanced and test.
11. If necessary, continue to rotate the clamps apart in smaller increments and test. If the vibration still exists, repeat the procedure at the front of the
drive shaft.
12. Install tire and wheel assembly.
(1) Position the tire and wheel assembly.
(2) Install the lug nuts.
(3) Lower the vehicle and tighten the lug nuts.
(4) Install the center cap.
NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.
13. Road test the vehicle.
