Expedition 4WD V8-281 4.6L SOHC (1998)
11. If equipped, remove the third row safety belt guide.
1
Lift the cover.
2
Use Safety Belt Bolt Bit to remove the safety belt guide bolt.
3
Remove the third row safety belt guide.
12. Remove the D-pillar trim panel.
^
Remove the liftgate door opening weather seal.
NOTE: Remove the lower hook attached to the quarter trim panel, followed by the top attachment, and then the lower rear attachment.
13. Remove the quarter trim panel.
1
Remove the screws and pin-type retainer.
2
Remove the quarter trim panel.