Expedition 4WD V8-281 4.6L SOHC (1998)
Seat Memory Switch: Description and Operation
Programming Seat Positions
A power driver seat position can be stored at any time. The driver must move the seat to the desired position using the driver seat switch assembly. The
driver must then depress the memory SET switch which activates the memory SET switch Light Emitting Diode (LED). Within five seconds (before the
LED goes out), the driver must select a memory position. Memory 1 is selected by depressing memory switch 1. Memory 2 is selected by depressing
memory switch 2. Memory 3 is selected by depressing both memory switch 1 and memory switch 2 simultaneously.
If no memory switch input is received within the five second time limit, the operation is aborted and the memory SET switch LED is turned off. If one of
the following inputs is received during the five secondprogramming limit, the operation is aborted and the memory SET switch LED is turned off:
-
Power driver seat switch.
-
Power outside rear view mirror switch.
-
Memory SET switch.
