Expedition 4WD V8-281 4.6L SOHC (1998)
Seat Memory Switch: Description and Operation
Recalling A Stored Seat Position
NOTE: A memory recall can be initiated only if the vehicle is in PARK or NEUTRAL gear and the ignition switch is not in START. A memory recall
in progress will not be affected by moving the ignition switch to START or by moving the gearshift lever out of PARK or NEUTRAL.
Once the driver has stored the desired driver seat position, the driver can recall the setting by depressing the corresponding memory switch or by using a
programmed remote entry transmitter.
^
The driver can recall the desired driver seat position by depressing one or both of the memory recall switches. Depressing memory switch 1 will
initiate a recall of the power driver seat position stored in memory 1. Depressing memory switch 2 will initiate a recall of the power driver seat
position stored in memory 2. Depressing memory switch 1 and memory switch 2 simultaneously will initiate a recall of the power driver seat
position stored in memory 3.
^
A remote transmitter can be used to recall previously set memory positions. Transmitters are manufactured with an assigned personality number
(1, 2, or 3) and are so designated on the back of the transmitter. The transmitter assigned with personality 1 is capable of recalling memory
position 1 only. Similarly, the personality 2 and 3 transmitters can recall only memory positions 2 and 3 respectively.
^
Memory recall occurs when the UNLOCK switch is depressed on the transmitter. The second depression of the UNLOCK switch, which unlocks
passenger doors, does not initiate a memory recall.
^
A memory recall in progress does not prohibit the initiation of another memory recall; the most recently requested memory recall will be executed.
