Expedition 4WD V8-281 4.6L SOHC (1998)
2. Remove the rear wheel disc brake shield.
1
Drill out the rivets.
2
Remove the rear wheel disc brake shield.
INSTALLATION
1. Seal the rivet holes with Silicone Rubber D6AZ-19562-AA or equivalent meeting Ford specification ESB-M4G92-A, and install the rear wheel
disc brake shield.
NOTE: Because the rear wheel disc brake shield is held in position by the four rear wheel disc brake adapter bolts, new rivets are not required.
2. Install the rear wheel disc brake adapter.