Expedition 4WD V8-281 4.6L SOHC (1998)
Speed Control Actuator Cable: Adjustments
1. Remove the speed control actuator cable clip.
2. Adjust the speed control actuator cable.
1
Set the throttle body cam to the closed position.
2
Pull on the speed control actuator cable to remove any slack.
3
Back off the speed control actuator cable one notch.
NOTE: The speed control actuator cable must NOT be pulled tight for proper operation.
3. Hold the (A) speed control actuator cable and insert the (B) speed control actuator cable clip securely.