Expedition 4WD V8-281 4.6L SOHC (1998)
^
Unclip right side fuel charge harness from cam cover studs. Refer to Figure 24.
^
Unclip ignition wire separators from right cam cover studs. See Figure 24.
^
Disconnect ignition wires from right side spark plugs. Route ignition wires to front of engine.
^
Disconnect right side fuel injector electrical connectors.
^
Disconnect Engine Coolant Temperature (ECT) sensor electrical connector. Refer to Figure 25.
^
Disconnect water temperature sender electrical connector. Refer to Figure 25.
^
Remove tie strap retaining alternator wiring harness to fuel manifold. See Figure 25.
42.
On 5.4L engines, proceed as follows:
