Expedition 4WD V8-281 4.6L SOHC (1998)
17.
Install right side exhaust manifold and gasket. Align exhaust system Y-pipe mounting flange with the studs in the exhaust manifold outlet before
completely installing the exhaust manifold on the cylinder block. Tighten right side exhaust manifold retainers in sequence shown in Figure 51 to
18-22 Nm (13-16 lb-ft).
18.
Position engine oil indicator tube in installed position.
19.
Install left side exhaust manifold and gasket. Tighten retainers in sequence shown in Figure 52 to 18-22 Nm (13-16 lb-ft).
