Expedition 4WD V8-281 4.6L SOHC (1998)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
REMOVAL
CAUTION: Always disconnect the battery ground cable prior to work on the electronic engine controls or damage to the electronic component may
occur.
1. Disconnect the battery ground cable.
2. Remove the Engine Coolant Temperature sensor (ECT sensor).
1
Disconnect the electrical connector.
2
Remove the engine coolant temperature sensor.
INSTALLATION
1. Install the engine coolant temperature sensor.
1
Install the engine coolant temperature sensor.
2
Connect the electrical connector.
2. Connect the battery ground cable.
