Expedition 4WD V8-281 4.6L SOHC (1998)
Intake Manifold: Service and Repair
Removal
WARNING:
^
DO NOT SMOKE OR CARRY LIGHTED TOBACCO OR OPEN FLAME OF ANY TYPE WHEN WORKING ON OR NEAR ANY
FUEL-RELATED COMPONENTS. HIGHLY FLAMMABLE MIXTURES ARE ALWAYS PRESENT AND CAN BE IGNITED,
RESULTING IN POSSIBLE PERSONAL INJURY.
^
FUEL IN THE FUEL SYSTEM REMAINS UNDER HIGH PRESSURE EVEN WHEN THE ENGINE IS NOT RUNNING.
1. Disconnect the battery ground cable.
2. Perform preservice procedures.
3. Drain the cooling system.
4. Compress and slide the hose clamp and disconnect the upper radiator hose.
5. Remove the engine Air Cleaner (ACL) and air cleaner outlet tube.
6. Remove the accelerator control splash shield.
1
Remove the bolts.
2
Remove the accelerator control splash shield.
7. Disconnect the accelerator cable from the accelerator cable bracket.
1
Remove the bolt.
2
Slide the accelerator cable up to remove it from the accelerator cable bracket.
