Expedition 4WD V8-281 4.6L SOHC (1998)
7. Disconnect the front auxiliary heater outlet line from the rear auxiliary heater outlet line.
1
Remove the nut.
2
Disconnect the line.
8. Cut the heater outlet line in the locations shown.
9. Remove and discard the cut sections.
INSTALLATION
1. Install the heater outlet line.
-
Install the end with the blue tape over the frame.
2. Install the heater outlet line.
-
Install the end with the red tape over the frame.
-
Install the end with the yellow tape between the frame and the body vertical flange.