Expedition 4WD V8-281 4.6L SOHC (1998)
Refrigerant Pressure Sensor / Switch: Service and Repair
A/C Cycling Switch
REMOVAL
1. Disconnect the A/C cycling pressure switch electrical connector.
2. Remove the A/C cycling switch from the top of the suction accumulator/drier.
INSTALLATION
1. Follow the removal procedure in reverse order.
-
Lubricate the O-ring seal with Motorcraft YN-12b refrigerant oil F2AZ-19577-AB or equivalent meeting Ford specification WSH-M1C231-B.
2. Perform refrigerant system Leak Detection.